進度：
radius 個fingerboard (12")
加side dot inlay (遲d補返d相)
在spring cavity兩邊加多條木(見圖一)，令hum 入screw 位能夠伸得deep d
DIY 一個工具架(圖二)，現在d tools 就手好多..

趕工的成果....

近幾個星期時間都積極趕工....

Neck:

已經deepen 80% 的fret slot，shape了90%的外形，neck heel 已經可以連接body....講起fret slot 就真係煩，本身用fret slot saw去deepen d slot，但係發覺d slot jam 住把saw，跟本saw唔到，結果要先用router level down 個fingerboard 少少，然後再黎過，但係都唔掂...

無意中上Stewmac 個網睇，原來佢地出一把專門用來deepen and clean fret slot 的saw，立即買返黎試下，efficiency 大大提高...(唉，又要洗錢...)

下一步要做fingerboard radius and 上inlay....又係好煩yei....

Body:

已經route 了 neck pocket、pickup cavity、bridge cavity等等，不過現在發現humbucker 位要route 深d，但又驚bridge hum 0個位會穿(下面是spring cavity)，但係又唔想用pickup ring，想direct mount....有無人有idea？

Fret Bender DIY ( base on Daniel's prototype)

多得老許Daniel提供的Fret bender prototype，小弟加以作出少許改良，變成左邊的DIY version！

效果十分理想，制作成本比起右邊的Stewmac Fret bender 平了幾十倍(原價要$6XXUSD，搶錢咁搶)..

有佢，離fretting的工序又近一大步..

fingerboard radius jig..

finish assembling the radius jig..

better pic

did a lot of sanding these few days...

round off the edges...

start working again...this time rounding off the edges....

...with this monster....
good tool=high efficiency

Trem King arrived!!

The trem king is going to be the bridge for the wolfgang, cant wait to see it in action!!
P.S. depite it's design and suppose to be "produced" in U.S., the first thing i saw on the tone block is the "made in Korea" sticker....